Nuaire DHD AutoFlow 5510E CO2 Air Jacketed Direct Heat Incubator

Nuaire DHD AutoFlow 5510E CO2 Air Jacketed Direct Heat Incubator

Standard Features
100% Stainless Steel Coved Interior Chamber
Foil Heaters Attached to Chamber Outer Walls
Removable Stainless Steel Shelves [489 mm2]
Remote Alarm Output Contacts
CO2 Sample Port
Adjustable Leg Levelers
Access Port
Digital Infrared CO2 Gas Sensor
Microcomputer-Based Controls
Replaceable HEPA Filter
Replaceable Fan Wheel

Dual Decontamination Cycles
95°C Wet Decontamination Cycle
145°C Dry Decontamination Cycle

Temperature Control System
Temperature Range: 18°C to 55°C (5°C Above Ambient to 30°C Ambient Max)
Temperature Sensitivity: ± .125°C
Temperature Uniformity: ± 0.3°C at 37°C
Temperature Accuracy: ± 0.1°C
Temperature Recovery: 0.3°C / min. (Average)
Temperature Display Resolution: 0.1°C

Exterior Dimensions (W x H x D) 648 x 1003 x 660 mm
Chamber Dimensions (W x H x D) 546 x 648 x 533 mm
Chamber Volume 188.51 litres

Original Manual

Serial~ 114389041907

Although originally purchased and commissioned in 2007, this unit has never been used and apart from some surface scratches on the outer left panel presents completely as new. As can be seen in the images the shelves are unused and have never been installed. The original unused water pan is also present