Binder Incubator / Cooler KB23 - Pre Used

Binder KB23 Cooling Incubator

Cooled incubator with mechanical convection

Serial No: 04-67785

The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.

Exterior dimensions     
    Width (mm)     435
    Height (incl. feet) (mm)     620
    Depth (incl. door handle, I-panel and connection 73 mm) (mm)     600
    Wall clearance, rear (mm)     100
    Wall clearance, side (mm)     100
    Number of doors (ea.)     1
    Inner glass door(s) (ea.)     1
            
    Interior dimensions     
    Width (mm)     222
    Height (mm)     330
    Depth (mm)     277
    Interior volume (l)     20
    Racks (number standard/max.)     2 / 3
    Load per rack (kg)     10
    Permitted total load (kg)     25
    Weight (empty) (kg)     44
            
    Temperature data     
    Temperature range (°C) 1)     0 - 100
    Temperature variation     
    at 5 °C (± K)     0,7
    at 25 °C (± K)     0,3
    at 40 °C (± K)     0,3
    Temperature fluctuation     
    bei 5 °C (± K)     0,3
    bei 25 °C (± K)     0,4
    bei 40 °C (± K)     0,1
    Recovery time after door was opened for 30 sec 2)     
    at 5 °C (min.)     5
    at 40 °C (min.)     2
            
    Electrical data     
    IP protection class acc. to EN 60529     IP 20
    Voltage (± 10%) 50 / 60 Hz (V)     110-115V
    Nominal power (kW)     0,34
    Energy consumption 3)     
    at 37 °C (W)     60
    Noise level (dB (A))     47

Features     Customer benefits     Characteristics
APT.line™     

    Rapid and constant growth of microorganisms
    Reliable and reproducable incubation results
    Broad range of applications

    

APT.line™ for maximum precision

    Homogeneous temperature distribution even under full load
    Tenths of a degree accuracy, precise temperature setting
    Long-term stability
    High standard according to DIN 12880 (27-point measurement)

Disinfection and cleaning     

    Simple and fast cleaning
    Maximum occupational safety

    

Disinfection routine at 100 °C

    High-quality inner chamber made of stainless steel
    Fully removable elements without bothersome fixtures

Inner chamber concept     

    More specimen storage with the same chamber volume
    Minimal operating costs

    

High energy efficiency

    Very tight door closure with 2-point door latch
    Low heat dissipation due to 60 mm insulation
    Inner glass door
    Condensation-free inner chamber
    Double door seal
    Door heating

Cooling system     

    Reproducible results
    Safe incubation conditions at high ambient temperature
    Flexible use of external devices (e.g. shakers)

    

    Cooling system with large evaporator plates
    No freezing thanks to double evaporator plate
    Carefully measured cooling up to -5 °C

Control and Documentation     

    Professional support during validation
    Time and cost savings
    Simple data transfer
    FDA-compliant documentation

    

    Programmable controller with intelligent temperature control and weekly program timer
    FDA-compliant software APT-COM™
    Years of proven and recognized validation and documentation materials
    Standard RS 422 interface for network connection